TaylorMade – Golfing Networks

TaylorMade reveals symbol-covered Liberty Line ahead of PGA Championship

admin — Sat, 13 Jun 2026 16:42:14 +0000

Yes, it’s red, white and blue, but the Liberty Line Collection is tons to Philadelphia-inspired details and images in honor of Aronimink’s home town.

NEWTOWN SQUARE, Pa. — Philadelphia doesn’t do disposable history. This is the city where independence was argued into existence by men wearing wool coats in the middle of summer and it feels like every brick building downtown has a plaque explaining why the country changed because of something that happened inside. Like Boston and New York, this Northeast is heavy with symbolism, so you don’t have to force it.

That’s what makes TaylorMade’s new Liberty Line Collection for the 2026 PGA Championship work better than most commemorative major championship gear.

The easy thing would have been to slap an American flag on a white staff bag, add a few stars near the valuables pocket and call it a day, but these bags, head covers and accessories have a lot more detail and thought than that.

The centerpiece is the Liberty Line staff bag ($699.99), and honestly, the most impressive part of it is the restraint. Yes, it’s white with red and blue accents, but there’s also “City of Brotherly Love” on the base, a 13-starred, colonial-style American flag on the handle, a Liberty Bell with “250th Anniversary of America’s Found” on the ball pocket and an image of Independence Hall has been added to the back-main pocket. Benjamin Franklin’s image is on the valuable’s pocket and each zipper has a tab that says “Love” on it with the round TaylorMade logo added instead of the O.

Shop TM Liberty Line collection

The stand bag ($279.99) carries the same design language into a more practical setup. Built on the FlexTech platform and weighing 4.5 pounds, it’s aimed at golfers who actually walk instead of simply displaying the thing in a simulator room. The red, white and blue paneling runs throughout without becoming overpowering, and the shared zipper-pull details tie it neatly back to the staff bag.

The headcovers complete the collection in a nostalgic way. The driver cover ($79.99) leans clean and traditional with white, blue and red accents. The Benjamin Franklin fairway wood cover ($69.99) has an Andy Warhol style to it and the hybrid cover ($69.99) might actually be the sleeper of the entire collection because the knit pom-pom look feels genuinely classic instead of trying too hard to look retro.

There are also commemorative Spider and blade-style putter covers available too.

Commemorative golf gear often struggles because it tries to communicate too much all at once. Patriotism. History. Prestige. Championship golf. Brand identity. This one understands something important: Philadelphia and the PGA Championship are already supplying the gravitas. TaylorMade simply had to build around it.

Shop TM Liberty Line collection

Source link

TaylorMade lets golfers build wildly custom MySpider ZT putters

admin — Wed, 03 Jun 2026 04:25:08 +0000

MySpider ZT lets golfers customize colors, shafts, alignment aids and engraving on TaylorMade’s Spider ZT putters.

There’s something oddly revealing about the way golfers build custom putters.

Some players want everything murdered out in matte black, as if their putter should look like it belongs in a stealth bomber. Others want bright paint fills, colorful shafts and alignment lines that resemble airport runway markings. Some golfers want absolutely no alignment aid at all because they think too many lines clutter their brain. Others look at a clean topline the way most people look at an unsolved math equation.

Clearly, TaylorMade understands this, which is why the company is opening up its Spider ZT platform to full-scale customization through the new MySpider ZT program. It gives golfers the chance to essentially design their own version of the company’s zero-torque putter.

And yes, if you really want a maroon-and-olive-green Spider ZT with a rainbow graphite shaft and your initials engraved into the sole, apparently nobody at TaylorMade is going to stop you.

The interesting part is that TaylorMade isn’t changing the performance DNA of the Spider ZT. The company is keeping the engineering exactly the same while handing golfers control over almost everything they can see.

That’s good, because Spider ZT wasn’t designed to simply be another Spider. It debuted last year and aims to provide golfers with more face stability and consistency. TaylorMade’s approach blends zero-torque concepts into a shape and visual profile that still feels familiar to golfers who have spent years looking down at Spider mallets.

Now golfers can personalize that platform almost endlessly.

The MySpider ZT Standard model ($549.99) is available in lie angles of 68, 70, 72 and 74 degrees, while the heavier Counterbalance version ($599.99) comes in 70, 72 and 74-degree options. Both retain the onset hosel design and toe-up balance profile found in the stock Spider ZT models.

From there, the sky’s the limit.

Golfers can select different front finishes, back finishes, sole plate colors, paint fill combinations, face insert colors, sightline configurations and shaft colors. The Standard model offers steel and graphite shafts in finishes ranging from traditional black and silver to maroon, olive green and rainbow.

TaylorMade is also offering multiple alignment configurations that range from no sightline at all to single lines, triple lines, T-style configurations and something called “Pilot’s Eye,” which sounds less like a putting aid and more like a rejected Tom Cruise movie title.

The Counterbalance version receives its own customization treatment too, including sole plate colors, face insert colors and engraving options.

Players can also add up to six engraved characters to the sole because apparently some golfers now want their putters personalized like luxury luggage.

Honestly, this all makes perfect sense because putters occupy a strange place in golf equipment. Drivers are often evaluated scientifically. Irons tend to be judged by performance and consistency. But putters live in a much more emotional space. Golfers develop attachments to shapes, colors, sounds and alignment features that can border on irrational superstition. And if you’ve ever watched someone make more putts immediately after switching from one putter to another, you already know how personal all of this becomes.

That’s why programs like MySpider ZT exist. For TaylorMade, it creates another layer of engagement around one of the company’s flagship platforms. For golfers, it creates the opportunity to build something that feels less like an off-the-rack purchase and more like their own creation.

Of course, some golfers are going to use that freedom tastefully. Others are about to build putters that look like a bass boat wrapped in energy drink sponsorship decals.

Whatever works for you folks. Whatever works.

Source link

Golfweek Q&A: Why TaylorMade is slowing its driver release schedule

admin — Fri, 29 May 2026 13:46:25 +0000

Learn why TaylorMade believes longer product cycles could benefit golfers, fitters and future innovation.

Last Friday, TaylorMade Golf confirmed that it is moving its metalwood lineup (drivers, fairway woods and hybrids) to a two-year product cycle. That means the Qi4D family introduced in 2026 will remain the company’s flagship metalwood line through 2027, with the next major driver launch expected in 2028.

Golfweek spoke with Brian Bazzel, a vice president at TaylorMade who is in charge of product creation, as well as research and development, about why the company made the decision, what it means for golfers and fitters, and how modern driver production is changing.

Golfweek: TaylorMade, for a long time, has been one of the companies that leads the metalwood category. The cadence has been that every year new drivers come out. What changed internally that made you decide the time is right to now move to a two-year product cycle?

Bazzel: I don’t know if it was so much an internal change as it was sort of studying what was going on in the market. Certainly, there’s things happening inside the building related to the advancements of innovation, and the impact or the complexity of those innovations to deliver more performance. We’re definitely studying and understanding what it takes these days to stay on top of things. And the reality is, it just is more complicated to show significant gains. So, between what consumers are doing externally and what it would take internally to do the things that we think are meaningful, it kind of added up to this decision.

Golfweek: How much did the fact that you’re getting close to the limits on things like moment of inertia (MOI), ball speed and overall performance factor based on the USGA and R&A rules, go into this decision?

Bazzel: We still believe there’s meat on the bone. We do believe there are advancements. And if you think about it, in a perfect state, I know they won’t allow it for it, but if you can get maximum COR [coefficient of restitution, a measure of a club face’s springiness] across the entire face every time for the player and add all the corrective nature to that driver so that even your worst swings would result in something better. I mean, that’s still what we’re going after. And there’s still ways to do that. But the reality is we are pushing up against a lot of the rules. But, I’d also say that the creativity and sort of innovative spirit that we have here still leaves us with a lot of opportunity.

Golfweek: Do you think golfers have become skeptical about year-over-year gains in drivers?

Bazzel: I think humans are naturally skeptical. To some degree, it’s a good quality of people to question things. And I would say in this world, and certainly with our company in the golf space, when we make these advancements, even if they’re small things, we like to ‘story tell’ them. We like to speak loudly about them and be proud of them. And sometimes I think people either don’t see it the same way or are expecting something more. Or (they) think maybe what we’re talking about is not as consequential as it would be to them as it is to us. It is the nature of the business and that’s okay.

Golfweek: How much does price factor into this? Drivers have become significantly more expensive over the last several years.

Bazzel: Well, I think every company is dealing with the same thing. It’s quite challenging to push performance without any cost. I mean, if you want to stay ahead, these products are complicated. The manufacturing, the materials, and so on. And so, I think more than anything, what we’re looking at is the understanding that golfers are forking over real money for these products, a meaningful amount of money. And we want to ensure that they’re getting every bit, if not more, than they even expected out of that product. And I don’t think it’s going away. I don’t think an extended life cycle gives us huge opportunities to be more efficient or more cost-effective. But planning our business, I think, will become a little bit more stabilized. And if it does turn out to stabilize pricing in the future, that would be great. But I don’t think that’s the spirit of the decision at this point. It’s just, again, I would say if there’s any connection, it’s the value of what people are spending versus what they’re getting.

Golfweek: How does a two-year cycle change the way TaylorMade approaches product development internally?

Bazzel: “Well, it’s still a little bit new, but as we look to the future, we’re so used to having these ideas just constantly flowing and then chipping away at those ideas. As you get further out, the funnel gets a little wider. For us, now, I would say it’s changing right now internally and it’s exciting. It’s energizing to the teams because I think we feel like we can dive even deeper on these products than we maybe have been able to in the past.

Golfweek: You’ve mentioned that keeping Qi4D in the market for two years could benefit fitters and consumers. How?

Bazzel: “Yeah, I think, honestly, it’s an exciting time for our fitters to be able to recognize the fact that they’re going to be able to use this tool, this sort of weapon, and that they can ensure that the golfers that for they’re fitting, it’s optimized for them. And it takes time, learning the product. And they don’t just learn TaylorMade products. They have to learn across the whole breadth of our competitors as well. But, understanding the nuances and how it applies to all these unique swings out there, I think this is an area where we’re really interested in and we want to be very supportive to our fitters

We have a fitting council, and they’ve asked for some things like this. And again, I think they’re just as excited as we are to be able to, in this case with Qi4D, kind of continue down the path. And they know they’re going to be able to feel more confident, I think, in what they’re doing on a daily basis. That leads to golfers being more enthused with their product, which is what we’re all trying to do.

Golfweek: Were you surprised by how much attention this decision received in the equipment world when the news broke last week?

Bazzel: I don’t know if I’ve read all the reactions, to be honest. I think we believe we’re doing this for all the right reasons. And honestly, and transparently, we’re constantly looking at the portfolio of our products in Qi4D and beyond. Are we addressing all the golfers out there in the way that’s most beneficial? And if we find opportunities that we’re not currently addressing, we’re going to introduce things that make sense

At the end of the day, I think most golfers have leaned in and said this is the right move. They’re listening, they understand, and can kind of see the bigger picture on this one. So far, even our partners, our retailers, have embraced this idea as we’ve been talking to them over the last couple of months. They’re in the business of selling more products as well, but they think this can lead to, again, a better business in the future.

Golfweek: You mentioned that fitting technology continues to evolve rapidly. How important is that to the future of metalwoods?

Bazzel: I think the fitting tools that are coming at us, the data acquisition, is enabling us to learn more. Even if you did get fit a year ago or two years ago, I think the advancement in fitting, and being able to apply these products in a way that golfers and understanding golfers at a deeper level, is going to lead to even better products in the future. Let’s just say you had an incremental change in a product, but you had a massive improvement in the fitting technologies and understanding the golfer so that you can get an even better fit. That’s part of this as well.

I think that’s changing rapidly in terms of understanding the golfer’s swing, 3D motion, certainly launch monitors and so on and so forth. And then, just the understanding of the golfer’s psyche within that. I mean, there’s so much opportunity that we think beyond just the physical part itself, but the applying of the part to the golfer, this is ripe for innovation.

Source link

An Honest Review of The TaylorMade M4 Driver

admin — Tue, 26 May 2026 10:47:32 +0000

The first time I tested the M4 driver was in 2018, shortly after its release.

As TaylorMade has launched several drivers since, I thought it would be fun to hit the range again and see how it compares to a newer model. Therefore, I have written a TaylorMade M4 driver review here to determine if it is still a force to be reckoned with.

After introducing you to the features and performance of this driver, I will assess how it compares to the manufacturer’s latest releases. In addition, the analysis will help you decide if the TaylorMade M4 driver is suited to your swing.

For readers looking for a quick summary, here are the highlights/lowlights:

Product Overview

TaylorMade M4 Driver

Highlights:

TaylorMade M4 produces a solid, explosive sound to warn your partners that a bomb is flying down the fairway.
Forgiveness is one of the crucial features of the TaylorMade M4 driver.
By adding an adjustable hosel, TaylorMade allows you to tinker with the loft, angle, and your clubface lie.

Lowlights:

would like them to offer more stock shafts that cater to every swing speed and tempo.

Check Price on Amazon

Overall Rating and Thoughts

The TaylorMade M4 is an exceptional driver. Although it is a few years older than newer models from the equipment giant, it remains relevant. Like new TaylorMade drivers, the M4 is highly forgiving, reduces spin, and generates rapid ball speed.

Overall, it gives the average golfer everything we need off the tee; and it is at a fraction of its release price. If you are after a highly forgiving, long, and adjustable driver, you should consider the TaylorMade M4 driver.

Overall Rating: 9.5/10

Quick Overview of The TaylorMade M4 Driver

Features

Twist Face Technology

The first stand-out feature of the M4 driver is its new twist face technology. Well, it was fresh back in 2018. The revolutionary new face curvature for that time produced a corrective face angle to combat off-center strikes.

Therefore, striking the ball in the high toe increases the loft of the face. Conversely, if the clubface catches the ball off the low heel, it reduces the apex of your shot. This is done to produce a consistent spin on all drives.

Furthermore, helping you get your ball airborne, the twist face technology resists side spin on heel and toe mishits. As a result, you produce straighter shots for an improved fairway in regulation record.

Excess side spin off the club face causes hooks and slices, which is the fastest way to ruin your hole before it begins.

Speed Pocket

When we miss the center of the driver’s face, we reduce the coefficient of restitution (COR), which slows down our ball speed. The loss of velocity leads to a weaker launch and a loss of distance.

Fortunately, TaylorMade’s engineers employed Speed Pocket technology to boost speed on all shots. Therefore, you enjoy consistent ball flight and distance on all connections.

Speed pocket technology is effective when you catch the ball low off the face. It springs into action and accelerates your ball speed to produce optimal yardage. Without this technology, your driver delivers inadequate spin and velocity for adequate yardage.

Hammerhead Slot

A hammerhead slot is inserted into the driver’s sole to support the outer portions of the slot. That reduces the mass, encouraging a more flexible face through impact. This benefits you on off-center hits, where you need all the ball speed necessary to produce sufficient distance off the tee.

In addition, the increased flexibility of the TaylorMade M4 driver expands the sweet spot for maximum forgiveness. As a result, the wider sweet spot delivers ample ball speed across the face for consistent distance off the tee.

Geocoustic Technology

Geocoustic tech employs sole shaping techniques to deliver superior sound and feel at impact. Therefore, you enjoy the rewarding acoustics of your clubface, striking the ball on every tee shot.

Furthermore, TaylorMade added a recessed sole contour construction to the head, freeing up weight in the clubhead. That enabled the engineers to craft a larger flexible clubface with an enhanced sweet spot. As a result, it delivers maximum forgiveness.

Adjustable Hosel

The M4 driver features an adjustable hosel, enabling golfers to alter their loft by 2 degrees of additional or less loft. Plus, adjustments impact the angle of the clubface.

For example, strengthening the loft by 2 degrees can open your clubface up to 4 degrees. That sets your driver up to deliver a fade bias. Conversely, lowering the loft by 2 degrees closes the club face by 4 degrees. This positions the driver for a draw bias.

In addition, altering the loft impacts the level of backspin RPM you produce at impact. Weakening the loft by 2 degrees can boost your backspin by 400 RPM. That setup prompts a high launch, ideal for slower swingers.

On the contrary, strengthening the loft helps you deliver a low spin off the driver’s face for maximum distance.

To alter the loft, you need a wrench to help you loosen the screws on the sole. Rotate anti-clockwise to slacken the screws, and remove them. Then, slip the head of the shaft. Turn the hosel to achieve your desired loft.

You can follow the video below by Golfbidder for a visual representation of the procedure:

Lofts

TaylorMade crafts the M4 driver in three key loft settings. The lowest lofted design is 9.5-degrees, followed by a 10.5-degree construction. Finally, golfers with a slow driver swing speed should appreciate the 12-degree driver.

Shafts

The only stock shaft available on the M4 is the Fujikura Atmos Red 5. Fujikura constructed this shaft in stiff, regular, and senior flex. Therefore, they are designed for golfers who produce fast, average, and slow club head speed.

Performance

Price

As an older model driver, the M4 is now at a convenient price point for mid and high-handicappers. It has come down by $200 to $300 in price, making it far more attractive to the average golfer than new premium drivers from TaylorMade.

Feel and Sound

Geocoustic technology delivers a solid deafening sound at impact. Exactly the noise you expect to hear from your driver when you crush it out of the sweet spot. In addition, it offers a relatively soft feel as it drowns out vibrations on off-center strikes.

Spin

On average, I generate 2100 RPM of backspin with my driver. When I tested the M4, I averaged 100 mph less than that, clocking in at 2000 RPM. I am satisfied with this level, and it is what I expect to receive from my big stick.

Forgiveness

The M4 delivers exceptional all-around forgiveness, from accelerating ball speed on off-center strikes to minimizing side spin. This support helps you achieve optimal distance and accuracy.

Distance

TaylorMade built the M4 to accelerate ball speed and reduce spin on your drives. My average driving distance is 270-yards, and the M4 produced 274-yards in testing. Therefore, it creates slightly more distance than my regular driver.

What I Like About The TaylorMade M4

Sound

Off the clubface, the TaylorMade M4 produces a solid, explosive sound to warn your partners that a bomb is flying down the fairway. Geocoustic technology helped the engineers execute advanced sole shaping techniques. This means that the clubhead is crafted for optimal sound and feel at impact.

Forgiveness

Forgiveness is one of the crucial features of the TaylorMade M4 driver. The presence of a flexible clubface, enlarged sweet spot, and hammerhead slot ensures a forgiving driver.

Its flexible face springs into the ball at impact and accelerates velocity. This prompts a high launching, long flying ball, resulting in exceptional distance. Even when you strike the ball low off the face.

Furthermore, its face curvature construction beats off unwanted spin prompted by off-center strikes. This reduces the risk of you hooking or slicing your drive into trouble.

Low Spin

Low spin off the tee enables you to produce piercing ball flight and prompt optimal forward roll upon landing. When I create excess spin, I balloon my drives and lose distance. The ball shoots into the air and descends rapidly before coming to an abrupt halt.

The beauty of the M4 is that it contains an adjustable hosel. Therefore, you can continuously strengthen the loft of your driver to reduce backspin RPM.

Adjustable Hosel

By adding an adjustable hosel, TaylorMade allows you to tinker with the loft, angle, and your clubface lie. If you are generating excess backspin RPM you can strengthen your driver’s loft to reduce spin. Conversely, you can weaken the loft to encourage additional backspin RPM.

Moreover, the hosel alters the angle of the face. You can set your club up to induce a draw or a fade. Strengthen your loft on the adjustable hosel, and keep your clubface open and ready to prompt a fade shape.

Contrarily, weakening the loft closes the club face by up to 4 degrees, encouraging the club to promote a draw.

This feature is suited to mid and high handicappers still identifying the perfect composition for their swings.

What I Dislike About The TaylorMade M4

Shaft Options

There is little not to like about the TaylorMade M4 driver. It is forgiving, feels superb, and delivers optimal distance on all strikes. However, they are skint on stock shaft options. There is only one brand of stock shaft available.

I would like them to offer more stock shafts that cater to every swing speed and tempo.

Related Reading: Since they are a highly reputable manufacturer, TaylorMade’s golf clubs are not found in the bargain bin. However, if the price is everything to you, there are more affordable options. Find your ideal big stick among our 10 best drivers under $200.

Matt Stevens

Matt Callcott-Stevens started playing golf at the age of 4 when Rory Sabattini’s father put a 7-iron and putter in his hand. He has experienced all the highs and lows the game can throw at you and has now settled down as a professional golf writer. He holds a Postgraduate in Sports Marketing and has played golf for 28 years. Current Handicap: 8

Source link

LPGA Tour’s The Chevron Champion Swings Big with Graphite Design Tour AD FI-6 Shaft Powered TaylorMade Qi4D Driver

admin — Sat, 23 May 2026 12:15:17 +0000

Carlsbad, CA – Pro’s Choice Golf Shafts, Inc. announced today that the winner of the LPGA Tour’s The Chevron Championship, held in Houston, TX, was playing a Graphite Design Tour AD FI-6 Stiff flex wood shaft in her TaylorMade Qi4D Driver. The champion claimed her third Major and 17th career win after posting a 4-day score of 65, 65, 70, 70 for a total of 18 under par, winning by 5 strokes.

On the DP World Tour, the winner of the Volvo China Open, held in Shanghai, China, was playing a Graphite Design Tour AD VF Utility Driving Iron in his Titleist T100 #3 Iron, claiming his 9^th DP World Tour title.

“Congratulations to The Chevron Championship winner for capturing her third Major and regaining the number 1 ranking. What a great exhibition of Accuracy and Distance and we are ecstatic she plays Graphite Design Tour AD FI”, stated Wayne Ageno, President, Pro’s Choice Golf Shafts, Inc.

The new 2026 Tour AD FI – Flight Intelligence – is the next evolution in golf shaft technology from Graphite Design. Designed and manufactured at Graphite Design’s Japan factory headquarters for players who demand precision, power, and consistency, the Tour AD FI features a futuristic look, complete with a sleek new TOUR AD logo, and is finished with a green-to-gloss black fade with silver accents.

Like the other high-performance Tour AD wood shafts, the Tour AD FI utilizes premium, aerospace-quality carbon-fiber materials and is available in 40g R2, R1, S flex and X flex, 50g R2, R1, S and X flex, 60g SR, S, X, and TX flex, 70g S, X, and TX flex, and 80g X flex.

The Tour AD FI shaft profile is Firm+ in the butt section and Firm+ in the center section and has a Stiff tip to promote Mid-launch angles and Low to Low/Mid-ball spin rates. It utilizes Graphite Design’s proprietary AD Shield technology and the new TORNADO TIP TECH, along with the modern Torayca M40X and T1100G material technologies, to reliably transmit the player’s input to the club head, allowing for consistent shot-making and enhanced performance on the course.

Whether shaping shots or maximizing distance, the new Tour AD FI adapts to your swing, delivering unparalleled stability and responsiveness. Elevate your game with a shaft that thinks as fast as you play – because intelligent performance starts with the new Tour AD Flight Intelligence golf shaft from Graphite Design.

About Pro’s Choice:

Pro’s Choice Golf Shafts is the exclusive distributor of Graphite Design golf shafts in the United States, Canada, Mexico, Europe, UAE, South Africa, South America, and Australia. Pro’s Choice Golf Shafts distributes all of the current Graphite Design shafts, including the new 2026 Graphite Design Tour AD FI wood shaft model, as well as the Anti-Gravity aG33-3, Tour AD GC, Tour AD VF, Tour AD CQ, Tour AD UB, Tour AD XC, Tour AD IZ, and Tour AD DI models of shafts. The company is located in Carlsbad, California, with a distribution warehouse located in Southern California.

About Graphite Design:

Located in Chichibu, Japan, Graphite Design has over 36 years of experience designing and manufacturing premium graphite-composite golf shafts. Numerous Graphite Design shafts can be seen in play by the best professional players on all tours worldwide. Validating the company’s “Tour AD” logo, all of Graphite Design’s Tour-proven shafts specifically promote “Accuracy and Distance”. On Tour, Graphite Design shafts recorded 44 Global tournament victories in 2025 and have helped numerous golf professionals earn well over 580 tour victories and multi-millions of dollars in prize money since inception.

Source link

TaylorMade goes dark: The Shadowfall collection is here

admin — Sat, 16 May 2026 00:36:49 +0000

Same Qi4D and P·790 technology, head-to-toe black finish. TaylorMade’s Shadowfall is for players who want it all, darker.

Some golfers want to blend in. They show up with their silver-faced titanium drivers and their chrome irons and look like everyone else on the first tee. Perfectly respectable. Nothing wrong with it.

Then there are the others. TaylorMade built the Shadowfall Collection for them.

Shadowfall is not a new line of technology; let’s be clear about that up front. It is a head-to-toe blackout of some of TaylorMade’s most popular gear: the Qi4D drivers, Qi4D fairway woods, and P·790 irons. Each is wrapped in a matte-black finish that makes the whole bag look like it belongs to someone who drives a matte-black Range Rover and has a very specific Spotify playlist.

Think of the Shadowfall Collection as the Johnny Cash of golf equipment. All black, with no apologies.

While the Shadowfall edition woods and irons look mean, they still perform like the original gear.

The standard Qi4D, Max and LS drivers ($699.99) have aerodynamic shapes that reduce drag and boost clubhead speed. Improved bulge and roll geometry produce tighter spin dispersion on off-center hits, so bad hits don’t punish you quite as severely. The Trajectory Adjustment System weights let players and fitters dial in ball flight, and the four-degree loft sleeve provides control over loft, lie angle, and face angle.

The fairway woods ($399.99) follow the same script. Speed Pocket technology protects ball speed on strikes below the sweet spot. Twist Face nudges those right-side misses back toward the target. The 3-, 5-, and 7-wood options cover every gap between the driver and your long irons.

And then there are the P·790 irons ($1,499.99 for 4-PW, AW), which is where Shadowfall really earns its name. These things look like something out of a James Bond movie. Dr. No would have loved them. The engineering underneath the black finish is as impressive as the looks, with a forged 4340M high-strength steel face that enhances ball speed and SpeedFoam Air in each head to soften the feel at impact. TaylorMade’s FLTD CG technology moves the center of gravity lower in the long irons for easier launch, then higher in the scoring clubs for more spin control.

Once you’ve committed to the aesthetic, you probably want the outfit to match, so the collection extends to apparel as well, with a Shadowfall hoodie ($120), T-shirt ($55), and A-Frame hat ($39.99), all in matching total blackout design.

The Shadowfall Collection is for a specific kind of player. The kind who, when asked what’s in the bag, just smiles.

David Dusek is a senior writer for Golfweek, covering golf equipment.

Source link

Rory McIlroy’s Masters 2026 TaylorMade golf equipment

admin — Tue, 05 May 2026 12:04:55 +0000

See the complete list of the golf equipment Rory McIlroy is using at the 2026 Masters Tournament at Augusta National Golf Club.

Here’s the complete list of the golf equipment Rory McIlroy is using at the 2026 Masters Tournament at Augusta National Golf Club.

DRIVER: TaylorMade Qi4D (9 degrees), with Fujikura Ventus Black 6X shaft – SHOP NOW

FAIRWAY WOODS: TaylorMade Qi10 (15 degrees), with Fujikura Ventus Black 8X shaft, Qi4D (18 degrees), with Fujikura Ventus Black 9X shaft – SHOP NOW

IRONS: TaylorMade P·760 (4), TaylorMade RORS proto (5-9), with Project X 7.0 shafts

WEDGES: TaylorMade MG4 (46, 50, 54, 60 degrees), with Project X 6.5 shafts – SHOP NOW

PUTTER: TaylorMade Spider Tour X – SHOP NOW

BALL: TaylorMade TP5 – SHOP NOW

GRIPS: Golf Pride New Decade Multicompound (full swing) / SuperStroke Zenergy Pistol Tour (putter)

Source link

Wyndham Clark Masters golf equipment from TaylorMade, Titleist, Ping

admin — Mon, 04 May 2026 00:02:19 +0000

See the complete list of golf equipment Wyndham Clark is using at the 2026 Masters Tournament at Augusta National Golf Club.

Here’s the complete list of the golf equipment Wyndham Clark is using at the 2026 Masters Tournament at Augusta National Golf Club, where he shot 4-under 68 to make a big move up the leaderboard on Friday.

DRIVER: TaylorMade Qi4D (10.5 degrees), with Project X Titan Black 70 TX shaft – SHOP NOW

FAIRWAY WOODS: TaylorMade Qi4D Tour (15 degrees), with Project X Titan Black 80 TX shaft, Ping G440 Max (19 degrees), with Project X HZRDUS TX shaft – SHOP NOW

IRONS: Titleist T200 (4-5), T100 (6-9), with True Temper Dynamic Gold X7 shafts – SHOP NOW

WEDGES: Titleist Vokey Design SM10 (46 degrees), with True Temper Dynamic Gold X7 shaft, (52, 56, 60 degrees), with True Temper Dynamic Gold S400 shafts – SHOP NOW

PUTTER: Ping Scottsdale TEC Ally Blue – SHOP NOW

BALL: Titleist Pro V1x – SHOP NOW

Source link

Rory McIlroy Masters golf equipment from TaylorMade WITB

admin — Wed, 29 Apr 2026 11:27:50 +0000

A complete list of the golf equipment Rory McIlroy used to win the 2026 Masters Tournament at Augusta National Golf Club.

Here’s the complete list of the golf equipment Rory McIlroy used to win the 2026 Masters Tournament at Augusta National Golf Club.

DRIVER: TaylorMade Qi4D (9 degrees), with Fujikura Ventus Black 6X shaft

Shop Rory McIlroy’s driver

FAIRWAY WOODS: TaylorMade Qi10 (15 degrees), with Fujikura Ventus Black 8X shaft, Qi4D (18 degrees), with Fujikura Ventus Black 9X shaft

Shop Rory McIlroy’s fairway woods

IRONS: TaylorMade P·760 (4), TaylorMade RORS proto (5-9), with Project X 7.0 shafts

WEDGES: TaylorMade MG4 (46, 50, 54, 60 degrees), with Project X 6.5 shafts

Shop Rory McIlroy’s wedges

PUTTER: TaylorMade Spider Tour X

Shop Rory McIlroy’s putter

BALL: TaylorMade TP5

Shop Rory McIlroy’s golf ball

GRIPS: Golf Pride New Decade Multicompound (full swing) / SuperStroke Zenergy Pistol Tour (putter)

Source link

TaylorMade SYSTM2 putters blend milled feel with modern stability

admin — Tue, 14 Apr 2026 03:39:46 +0000

TaylorMade’s SYSTM2 putters bring milled feel, stroke-fitting options and a different approach than Spider.

Gear: TaylorMade SYSTM2 putters

Price: $249.99 each

Specs: Metal injection molded 304 stainless steel. Available 34” and 35”

Available: March 26

Who it’s for: Golfers who prefer a traditional look and responsive feel but still want modern stability and options that match how they move the putter.

What you should know: SYSTM2 is a fully milled lineup that blends classic shapes and milled feel with modern weighting in a range of blades and mid-mallets.

The Deep Dive: As popular as the multi-material TaylorMade Spider putters have become, there will always be a meaningful group of golfers who want a milled putter. For them, feel is everything. At impact, they want to know exactly what the club is doing and where on the face the ball was struck. No layers, no guesswork, just feedback.

TaylorMade had those golfers in mind when it developed the new SYSTM2 line. These blades and mid-mallets feel less like a reaction to trends and more like a return to something foundational.

The starting point SYSTM2 is material. Each head is crafted from soft, metal injection molded, 304 stainless steel. It gives the putters a quieter, more responsive feel at impact. For golfers who rely on touch as well as mechanics, it provides the kind of feedback that can make it easier to control distance, especially on long-range putts.

From there, the story becomes one of precision. The faces are fly-cut and then finished with a secondary milling process that creates grooves at a carefully controlled depth. The goal is consistency. When the ball comes off the face, whether from the center or slightly off, the roll is meant to behave in a predictable way.

TaylorMade uses metal injection molding to shape the heads in a way that allows weight to be repositioned more efficiently. By pulling mass away from the center and moving it toward the edges, the putters gain stability without losing their compact appearance. The result is a design that helps the head stay more stable through impact, even if the strike is not perfect.

At address, the SYST2 putters present a look that feels familiar but guided. The two-tone finish creates a natural contrast between the front and back portions of each head, framing the ball in a way that helps your eyes square the face and trust the line more easily.

The Soto, Juno and Del Monte blades offer three variations on a theme. The Soto leans softer in its shaping, the Juno introduces more defined edges, and the Del Monte has been stretched into a wider profile that adds a bit more stability through a deeper center of gravity and higher MOI.

The Bandon and Ardmore are mid-mallets, a putter style that has grown in popularity over the last decade. They sit between traditional blades and larger mallets, offering a balance of control and forgiveness. Both shapes are available with either an L-Neck or a single bend shaft, which allows golfers to match the putter to the way they naturally move it. Players with more arc in their stroke can let the toe rotate, while those who prefer a straighter motion can keep the face more stable.

SYSTM2 putters stands in contrast to the Spider family, which has become one of the defining putter lines in the game. Spider putters are built around stability, with roll-enhancing face inserts, slightly-larger shapes, multi-material construction and higher MOI designs aimed at helping golfers reduce face movement and create a more repeatable stroke.

SYSTM2 is different. The heads are more compact, the feedback is more immediate and the designs encourage golfers to work with their natural tendencies instead of minimizing their effects. Where Spider is often about making the stroke simpler and overcoming shortcomings, SYSTM2 is about making it more precise.

For some golfers, especially those who have struggled with consistency, Spider will continue to make more sense. For others who want to feel the strike, shape the stroke and rely on feedback, SYSTM2 offers a different kind of confidence.

In other words, SYSTM2 is not a replacement. It is another answer.

Source link