fitting – Golfing Networks

He Played Irons That Were Too Long FOR YEARS … This Fitting Changed EVERYTHING! // Follower Fit

admin — Sun, 07 Jun 2026 15:54:59 +0000

Tyler was last fit for his clubs 15 years ago… and ever since, he’s been playing irons that were one inch too long—and he had no idea it was holding him back.

When he came in for a Club Champion iron fitting, his fitter Casey immediately noticed something was off. Tyler’s strike pattern was consistently high and toward the heel, a telltale sign that something in the setup wasn’t right. After taking measurements and digging into the data, Casey made a simple but game-changing call: go back to standard length.

From there, everything started to click.

Paired with proper shafts and optimized clubheads, Tyler’s ball striking tightened up, his contact improved, and the numbers started to tell a brand new story.

After years of playing the wrong specs, Tyler is finally dialed in—and heading into his most confident season of golf yet.

BOOK A FITTING

USA: https://clubchampion.com/locations?ut…
CAN: https://clubchampion.ca/locations?utm…
UK: https://clubchampiongolf.co.uk/locati…
AUS: https://clubchampion.com.au/locations…

SUBSCRIBE TO THE CHANNEL
https://bit.ly/3TrDLVX

Source link

Titleist Vokey WedgeWorks adds new grinds built for precision fitting

admin — Sun, 12 Apr 2026 14:36:46 +0000

New Vokey WedgeWorks grinds expand SM11 lineup with more sole options to match swing type, turf conditions and short-game needs.

As golfers attain experience and concentrate on their short game, many have an epiphany and suddenly realize that it’s not the that helps them hit the perfect chip shots or pitch shot. It’s the sole, and how it interacts with the turf, that can make or break the outcome.

That’s why Titleist offers six different sole grinds in the SM11 lineup, but the company’s boutique wedge department, WedgeWorks, gives players access to sole grinds and configurations that ordinarily are reserved for PGA Tour stars like Ludvig Aberg, Cameron Young, Justin Thomas and Jordan Spieth. Those players know that if you can match the sole of a wedge to how you deliver the club, the game around the greens starts to feel a whole lot easier.

Over the last few seasons, WedgeWorks has dropped several limited-edition offerings at different times during the years, but beginning March 27, Titleist is making all six new WedgeWorks lob wedge options—L, A, K*, A+, V and a 62M—available to the public for $229 each.

At first glance, these wedges look familiar, and that’s by design. They cast from 8620 carbon steel, like the SM11, and share the same core technology platform as the SM11 lineup, including refined center of gravity (CG) placement, progressive groove shaping, and a new directional face texture designed to enhance friction and spin consistency. The WedgeWorks wedges, however, come standard with a raw steel finish, so, unlike the standard SM11 wedges, they will rust over time and with exposure to moisture.

But the real story WedgeWorks clubs isn’t in the face or the finish. It’s in the sole.

SM11 already offers 27 different loft, bounce and sole grind combinations, but WedgeWorks goes further to offer Tour-inspired shapes that were not added into the stock offering lineup because they’re more specialized. In other words, this is where the nuances live.

Each of these wedges, which are all available with 58 or 60 degrees of loft except the 62M, is essentially a different answer to the same question: how does this wedge move through the ground for a specific type of player?

The L Grind is a narrow, low-bounce option with relief in the heel, toe and trailing edge. It’s designed for players who like to open the face and play shots off firm turf, but who still want a touch of forgiveness to keep the club from digging too aggressively.

The A Grind, born from a request for performance on firm Australian conditions, has a smoother, faster-moving sole that minimizes resistance through tight turf. It is built for players who want to slide the club under the ball cleanly when there isn’t much grass to work with.

The K* Grind takes one of the most popular bunker-friendly shapes, the K Grind, and refines it. It keeps the wide sole that helps in soft sand, but adds relief and a pre-worn leading edge to make it more versatile when the face is opened.

The A+ Grind sits somewhere in the middle. It has more bounce and width than the A, but still moves quickly through the turf. It’s a good fit for players who find the traditional M Grind a bit too bouncy and want something that sits lower to the ground.

The V Grind is built for steeper players. With more forward bounce and added relief, it’s designed to handle softer conditions and players who lean the shaft forward and take divots, helping prevent the club from digging too much.

And then there’s the 62-degree M Grind, which takes Bob Vokey’s favorite all-around sole (M standards for ‘Bob’s MOST favorite’) and adds more loft. It’s a shotmaker’s tool, giving players the ability to hit higher, softer shots when they need to stop the ball quickly.

There’s a reason these grinds exist outside the standard retail lineup. They’re not meant to be one-size-fits-all solutions. They’re tools.

What Titleist is doing with WedgeWorks wedges is giving golfers and fitters more ways to match the club to the motion. And while most recreational players won’t cycle through six different lob wedges the way tour players do over the course of a season, having access to these options means you’re more likely to find something that actually fits how you play.

Because at some point, it stops being about technique alone. Sometimes, it really is the sole.

Source link

TaylorMade Qi4D drivers focus on speed control, spin and fitting

admin — Sat, 14 Mar 2026 15:49:15 +0000

TaylorMade’s Qi4D drivers break speed into four dimensions, pairing carbon faces, adjustable weighting and stock shafts built to fit more swings.

Gear: TaylorMade Qi4D, Qi4D LS, Qi4D Max drivers

Price: $649 with Mitsubishi Reax shaft and Golf Pride Z Grip +2; $699.99 with reflective fitter markings

Specs: Titanium chassis with carbon face, crown and sole panels, moveable weights and adjustable hosel

Available: Jan. 29

Who it’s for: Golfers seeking more consistent ball speed and tighter spin windows.

What you should know: TaylorMade rebuilt its driver platform around four dimensions of performance: face behavior, aerodynamics, shaft response and center-of-gravity adjustability. The goal is to deliver a more predictable launch and spin for a wider variety of swings.

The Deep Dive: As they were developing the Qi4D driver line, TaylorMade’s designers and engineers broke the concept of speed into four dimensions, focusing on the face, the shape of the head, the shaft, and the adjustability features that help ensure a proper fit. If those elements could be dialed in, they believed they could produce a driver that would work for a wide range of golfers. That included staff players like Rory McIlroy, Nelly Korda, and Scottie Scheffler, as well as recreational golfers.

Now you know what the name Qi4D stands for: four dimensions of speed. While the standard Qi4D, the low-spin Qi4D LS and the forgiveness-minded Qi4D Max all share several core technologies, they are designed for very different types of players.

All three models feature large carbon fiber crowns and sole panels, along with adjustable hosels that allow golfers to increase or decrease loft by up to 2 degrees. Each model also features a carbon fiber face. This technology first appeared in TaylorMade’s Stealth drivers in 2022. But for Qi4D, TaylorMade refined the face by tightening manufacturing tolerances so the faces sit closer to the USGA and R&A limits on coefficient of restitution (COR) and characteristic time (CT). The more precisely TaylorMade can control the hitting area, the more consistently it can increase ball speed without risking non-conforming heads.

TaylorMade also revised the face curvature from top to bottom, known as roll. Typically, shots hit high on the face launch higher with less spin, and low-face strikes launch lower with excessive spin. By rounding the roll radius, Qi4D drivers add spin to high-face strikes and reduce spin on low-face strikes, normalizing spin across a larger portion of the hitting area for more consistency.

Although custom fitting is growing, most golfers still buy stock-shaft drivers, so offering stock shafts that could better match what most golfers need to produce high-quality strikes was another priority for TaylorMade.

After studying more than 11,000 swings from staff professionals and recreational players, the brand’s fitters identified correlations between a golfer’s release patterns and the shaft they ended up using.

TaylorMade grouped players into three categories: high rotation (HR), medium rotation (MR), and low rotation (LR). Specific shaft designs consistently matched each group’s delivery patterns. Then it partnered with Mitsubishi Chemical to create three updated Reax shafts — Red, Blue and White — that matched those patterns. Red has a softer tip for HR players, White has a stiffer tip for LR players, and Blue sits in the middle for MR players.

With these shafts in place, TaylorMade intends for fitters to use the head, loft and moveable weights to produce the ball flight a player wants, while the shaft helps the golfer deliver the club more consistently.

Finally, but offering three different Qi4D drivers, TaylorMade felt nearly every player should be able to find a combination of head style, loft, shaft and adjustable features to maximize their swing.

The standard Qi4D (9, 10.5 and 12 degrees; 8-degree RH only) includes two 4-gram weights in the front heel and toe ports and two 9-gram weights in the rear ports. Fitters can configure those cartridges to create strong draw, strong fade, subtle draw or subtle fade biases. Putting both heavy weights forward lowers launch and spin while increasing speed. Placing both heavy weights in the back maximizes forgiveness and stability. The head is 4 millimeters shorter from front to back than the Qi35, but TaylorMade says it is more aerodynamic and produces about 1.2 mph more ball speed.

The Qi4D Max (9, 10.5 and 12 degrees) is the most stable and most forgiving driver in the lineup for players who struggle with inconsistent strikes. Instead of using titanium in the ring that forms the head frame, designers saved weight by using forged aluminum, which is then milled into the final structure that holds the carbon face, crown, and sole. The Max has two moveable weights, a 4-gram and a 13-gram, positioned in the front and back of the sole. The head has a built-in draw bias and less left-right adjustability than the standard Qi4D. With the 13-gram weight in the back, the moment of inertia increases significantly. The combined MOI is about 9,700 g/cm2. That does not meet the technical threshold to be labeled a 10K driver, but the Qi4D Max is TaylorMade’s first ultra-high-MOI driver with an adjustable hosel.

TaylorMade will also offer a Qi4D Lite (10.5 and 12 degrees), which is 30 grams lighter than the standard Qi4D Max and designed for golfers with slow-to-moderate clubhead speed.

The Qi4D LS (9 and 10.5 degrees; 8 degrees RH only) is the lowest-spinning and lowest-launch model. It remains a 460cc head but has a more rounded profile. The crown sits higher behind the topline and the back of the sole rises more sharply, which creates the most aerodynamic shape in the Qi4D line. The LS includes 4-gram and 15-gram weights so players and fitters can adjust launch and spin.

TaylorMade is also making its reflective fitting heads available to consumers. These heads were previously limited to fitters only. They are legal for play and allow golfers with access to Foresight launch monitors to collect clubhead data along with ball data.

Source link

Ping s259 wedges add spin and six grinds for better short game fitting

admin — Sat, 24 Jan 2026 18:17:43 +0000

Ping’s s259 wedges replace the s159 line with six grind options, refined shaping and Hydropearl finish for more consistent spin and turf interaction.

Gear: Ping s259 wedges

Price: $217.50 each with Ping Z-Z115 steel shaft. $232.50 w with graphite

Specs: Cast 8620 carbon steel heads with machined face and grooves, six sole grinds (S, W, B, H, T, and E), Hydropearl 2.0 finish, and lofts from 46 to 62 degrees for both right- and left-handed players.

Who it’s for: Golfers seeking wedges that offer precise distance control, consistent spin, and improved turf interaction through a wide variety of sole and grind options.

What you should know: The s259 wedges replace Ping’s s159 lineup and expand grind options to six, offering better fitting versatility for all turf types and swing styles.

The Deep Dive: The new s259 wedges mark another steady evolution in Ping’s long tradition of creating short-game tools that can be mixed and matched to handle nearly any chip, pitch, bunker shot, or recovery a golfer might face around the green.

While the company hasn’t reinvented its wedge playbook, it has refined nearly every detail — from shaping and sole geometry to spin consistency and sound — based on Tour player feedback and fitter data. The result is a deeper wedge lineup with more grind options and a cleaner look designed to help golfers control trajectory and spin from any lie.

Each head is cast from 8620 carbon steel, a material chosen for its soft feel and durability. The faces and grooves are precision-machined to ensure the hitting area is perfectly flat and the grooves deliver maximum allowable spin.

The center of gravity (CG) in the s259 wedges has been subtly repositioned to sit higher in the blade, helping produce a lower, more controlled trajectory that accomplished players tend to prefer. The offset and topline have been refined slightly to frame the ball cleanly at address, giving the wedges a balanced, confidence-inspiring appearance that blends seamlessly with Ping’s i-series irons.

Ping once again applied its Hydropearl 2.0 finish, a glare-reducing coating that repels water and increases friction between the ball and face in damp conditions. That should translate to more spin consistency when playing early-morning or wet-weather rounds.

With six grind options and multiple bounce configurations, the s259 family gives fitters more flexibility to customize wedge setups for a wide range of playing styles — from steep, digger-type players to shallow, sweeping strikers.

S Grind: An all-around option with moderate bounce and a mid-width sole that suits most golfers.
W Grind: A wider sole with higher bounce, ideal for softer turf or players with steeper swings.
B Grind: A narrower sole for players with shallow attack angles or those who like to open the face around the green.
H Grind: A high-bounce option with heel and trailing-edge relief that helps the club glide through sand or thick rough.
T Grind: The thinnest sole and lowest bounce, perfect for firm turf and tight lies.
E Grind: New for 2026, the E sits between the H and T grinds, offering generous heel relief with a slightly wider sole for added forgiveness on open-face shots.

Loft options range from 46 to 62 degrees (with all lofts and grinds available in both right- and left-handed models), and there are more bounce combinations per loft than before. The popular W grind, for example, now extends into the 50- and 52-degree range in response to fitter and Tour feedback calling for more forgiving gap wedges that transition smoothly from modern, stronger-lofted irons.

For players who care more about scoring than spectacle, the s259 wedges represent another subtle but meaningful step forward for Ping — a short-game family designed not to surprise, but to perform exactly as expected shot after shot.

Source link